|
Standards
- Goddard Standards including Program Guidelines (PG's) and Work Instructions (WI's)
- Here is a list of many of our commonly used documents found in GDMS:
- GSFC-STD-1000, GSFC Gold Rules for the Design, Development, Verification, and Operation of Flight Systems
- GSFC-STD-7000, GENERAL ENVIRONMENTAL VERIFICATION STANDARD (GEVS) For GSFC Flight Programs and Projects
- 500-PG-8700.2.5, GSFC Engineering Drawing Requirements Manual
- 500-PG-8700.2.9, Issue and Management of GSFC Engineering Drawing Numbers
- 540-PG-8700.2.1, Design and Certification of Dollies, Stands, and Spacecraft Shipping Containers
- 540-PG-8700.2.2, Design of Mechanical Test Fixtures
- 540-PG-8072.1.2, Mechanical Fastener Torque Guidelines
- 540-PG-8719.1.1, Lift Sling Design
- 541-PG-8072.1.2, Flight Fastener Integrity Requirements
- 543-PG-8700.2.1, Guidelines for Designing and Using Drill Template Jigs
- 549-PG-8702.1.3, Critical Lifting and Handling Operations in the I&T Complex
- NASA Standards Program: Search for all NASA and Industry Standards and Specs here!
- Here is a list of many of our commonly used standards:
- NASA-STD-5001, Factors of Safety Including Glass
- NASA-STD-5005, MGSE Standards
- NASA-STD-5017, Design and Development Requirements for Mechanisms
- NASA-STD-5019, Fracture Control Requirements
- NASA-STD-5020, Threaded Fastening Systems Requirements
- NASA-STD-6016, Materials and Processes for Spacecraft
- NASA-STD-8719.9 Standard for Lifting Devices and Equipment
- Aluminum Material Specifications(AMS 4027, AMS 4078, ASTM B209, ASTM B211)
- A286 Fasteners(NAS1351, NAS1352, NAS6700)
- AMS-5731, A286 Bar Material Spec
- MIL-DTL-5541, Chemical Film(Iridite)
- MIL-A-8625, Anodize
- MIL-HDBK-5J: Materials Properties
Drafting and Drawings
Mechanical Design Software
Materials
Fasteners
MGSE Safety Requirements
Safety
Testing
Launch Vehicles / Souning Rockets / Aircraft Sites
Mass Properties
Design Reviews
Mechanisms
Misc. References
|
|